SWORKZ S35-4 Nitro 1/8 Off Road detailed !!! Available at your local SWORKz dealer in April. Preorder now !!
The SWORKz S35-4 1/8 Nitro is designed for pure racing. The geometry of the car provides optimized corner speed compared with easy handling and maximum traction.
The S35-4 features a T7075 hard anodized and lightened aluminium chassis with a wide layout that was tested for a long time by our factory pilots to guarantee the best performance.
The totally new developed HET differentials are included too and provide a traction, that is not possible with old systems.
하이트랙션 디프가 기본 포함
The new S35-4 comes with a lower shock layout in front and rear and the construction of the shocks is adapted to that new optimized layout.
조금 짧아진 프론트 리어 쇽/쇽타워
The fixed shock spring plates will make it almost impossible to lose them anymore.
신설계의 쇽 스프링 컵, 주행 중 이탈 가능성을 줄임
The steering geometry, with new Ackerman and steering plates, gives the driver the feeling of total control over the S35-4.
신형 애커먼 플레이트. 최적화된 스티어링
With the toe in plates, which now contain square inserts, you can adjust the geometry of your SWORKz S35-4 to fit to every track layout and track condition.
토인 플레이트는 사각형 인서트를 사용하도록 되어 있어 지오메트리를 자유자재로 변경가능
Lower arms in front and rear are made of a newly developed composite material and fit exactely to the new chassis geometry.
신소재로 만들어진 로어 암
Side guards were redesigned in the same way.
사이드 가드도 신소재 사용
With the new lightened wing support you can adjust position and angle of the wing to give your SWORKz S35-4 the perfect balance on the track. Together with the optimized new body shell, the aerodynamic system is working perfectly together.
경량 윙 마운트, 높이 및 각도 조절 가능
신설계된 바디는 공력 특성 향상
Another new development in our SWORKz S35-4 is the totally new rear hub. Composite material combined with Carbon plates gives you the possibility for various setups.
신형 리어 허브
카본 플레이트와 결합되는 수지 허브는 여러 셋업이 가능하도록 설계
The newly developed Composite material is working perfectly together with the HET differentials to provide maximum traction.
하이트랙션 디프의 특성에 트랙션을 확보할 수 있도록 설계된 리어 수지제 허브
There many more small changes and smart ideas in your new SWORKz S35-4, that make the car being a real winner.
The secret of a modern racing car is the possibility to adapt the setup to every track for top pilots but also have a standard setup that works on most tracks for hobby pilots.
And your SWORKz S35-4 is having these two characteristics in perfection.
The SWORKz development team focused on using materials, corresponding to the highest quality standards, when designing the car. You will find only 100% SWORKz quality in the S35-4 kit.
아래의 부품이 새로 변경되었다.
· New T7075 Hard Anodized, Lightend Aluminium Chassis
· New Wide Chassis Design
· New Lower Shock Towers
· New Shorter Shock Bodies
· New Shorter Shock Shafts
· New Shock Caps
· New Shorter Front Shock Springs
· New Fixed Shock Spring Holder
· New 3mm Updated Rear Shock Studs
· New Ackerman Plate
· New Steering System
· New Servo Saver Aluminium Part
· New Servo Saver Fixable Nut
· New Servo Saver Plate
· New Servo Saver Post Locking Design
· New Steering Balls
· New Steering Knuckle Plates
· New Updated Toe In Plates with Square Inserts
· New Lightweight Wing Mount
· New Side Guards
· New Lower Front and Rear Arms
· New Body Posts Front and Rear
· New Composite Rear Hubs with Carbon Plates
· New Multi Adjustable Ball System for Rear Upper Arms
· New Anticlock Screws for Shocks
· New Aerodinamically Optimized Body Shell
· 3 HET Differentials Included
· 2 Front Chassis Braces Included
· Black Competition Shock Springs Included
· Adjustable Wing Position
· Adjustable Wing Angle
· More Balance Weight Positions
· Stronger Downstop Area
· Optimized Composite Material
· Aluminium Parts in T7075